How to find the MAC address of the XBOX One via the LAN connection 6. Your Wired MAC Address should be on display on the right The MAC address will be made up of pairs of alphanumeric characters separated. Portable Local Area Network (LAN) Speed Test for Windows, Apple Mac OS X, Linux. LAN Speed Test and LAN Speed Test (Lite) are now the same download.
Windows If you wish to pre-install drivers before your adapter arrives, just download and run the utility from the link below: After downloading, simply double-click on the.exe file to begin installation. You will receive a confirmation that the process has begun, and another upon successful completion- this should take less than a minute on most systems.
Note: ARM-based Windows 8/8.1 tablets such as the Microsoft Surface RT do not have drivers for the ASIX 88179 built in. ASIX does not provide a Surface RT compatible driver for installation. Windows PC’s with internet access should automatically download and install drivers from Windows Update. A driver CD-ROM. is also provided in the packaging with the product.Please note that Windows 8/8.1 driver is not loaded on the CD, however it can be downloaded from the link above.
Advertisement So you want to have your machines go to sleep when they are not working and then be able to remotely connect to them and have them automagically respond? This is cross platform and can potentially work on any computer.
The computers can be in a totally powered off state (but still connected to the power outlet) and woken up all the way to a simple stand-by mode. This is called Wake On LAN. According to, Wake-on-LAN is an Ethernet computer networking standard that allows a computer to be turned on or woken up by a message.
The message is usually sent by a simple program executed on another computer on the local area network. Wake-on-LAN is also known as Wake on LAN, WOL, or sometimes WoL.
It may also be known as Remote Wake-Up or RWU. Before we begin, we should go over the system requirements for using Wake On LAN. The system you are launching the Wake On LAN command from does not need to match the requirements — just the machine you will be waking up. Here they are, right from the same page: Wake-on-LAN support is implemented on the motherboard of a computer and the network interface, and as such, is not dependent on the operating system running on the hardware, although the operating system can sometimes control the Wake-on-LAN behavior. If the network interface is a plug-in card rather than being integrated into the motherboard, the card may need to be connected to the motherboard by a cable.
Motherboards with an embedded Ethernet controller which supports Wake-on-LAN do not need a cable. If you are having issues with WOL, check your BIOS setting and make sure if the Ethernet card is a add-on card, it is still connected to the motherboard via a cable. There are many ways to trigger a Wake On LAN event and we will be exploring how to do Wake on LAN using the Mac Address of the machine in question. The MAC address is a unique address given to your network adapter or NIC. To find your MAC address, you can dig into your network adapter’s properties.
But to find a remote machine’s MAC address or yours easily, we can use this simple command line application. Download that and run it from the command line like so. So I could use MCGETMAC.exe 127.0.0.1 to return my local machine’s MAC address or I could use MCGETMAC.exe KarlXP to grab it. Once you have it, store it in a safe place. Next, we will need to download MC-WOL.EXE both of these files are from.
Save that EXE file to the same place you have saved MCGETMAC.exe for ease of use. Now you can go back to your CMD window and type MC-WOL.exe and the MAC address.
In my case, I typed MC-WOL.exe 00:0C;F1:F9:6F:F2 and hit Enter. This was my result: The “Magic Packet” was sent to my remote machine and I was able to wake it up. Now I can include these commands in batch files or scripts and save power and money while I am at it!